Request a Quote
News 7 min read

How to Remove Arsenic From Water: A Simple Guide for Well Owners

how to remove arsenic from water

Here’s how to remove arsenic from water in three steps: test your water at a certified lab, find out which type of arsenic you have, then choose a treatment that works on that type. A certified reverse osmosis unit, a special filter media or an ion exchange system can all work. Boiling will not.

Arsenic has no taste, smell or color. So a lab test is the only way to know if it’s in your water. A USGS and CDC study (2017) estimated that about 2.1 million people in the US drink from private wells with arsenic above the safe limit.

Step 1: Test Your Water

The EPA limit for arsenic in public drinking water is 10 parts per billion (ppb). Public water systems have had to meet it since January 2006. The EPA’s health goal for arsenic is zero.

Private wells don’t have to follow that rule, so testing is your job. Here’s what to do:

  • City water: read your water company’s yearly water quality report.
  • Private well: use a state certified lab. Many health departments say to test at least once, then every 3 to 5 years. Arizona suggests every three years, and Iowa’s State Hygienic Laboratory suggests every five.
  • Over 10 ppb? Use bottled water for drinking and cooking until treatment is in place.

Step 2: Find Out Which Arsenic You Have

Arsenic shows up in water in two main forms. Knowing which one you have decides which treatment will work.

Arsenic III  Arsenic V 
Electric charge  None  Negative 
Easy to remove?  No  Yes 
Where it’s common  Groundwater with little oxygen  Water with oxygen or chlorine 

Think of arsenic V as having a “handle” (its negative charge) that filters can grab. Arsenic III has no handle, so it slips past many filters.

A lab can tell you which type you have with an arsenic speciation test. The Water Systems Council notes that arsenic III is more common in groundwater. That’s why many well systems need an extra step called oxidation.

Oxidation changes arsenic III into arsenic V. Common ways to do it are chlorine, ozone or potassium permanganate. If you use chlorine, the Maryland Department of the Environment suggests adding a carbon filter after it to remove leftover chlorine.

How to Remove Arsenic From Water: Match the Treatment

Choose your treatment based on your arsenic type, how much water you want to treat, and what else is in your water.

Treatment  Arsenic III  Arsenic V  What it treats  Keep in mind 
Reverse osmosis (under sink)  Partly (50 to 80%)  98% or more  One tap  Needs oxidation for arsenic III 
Iron based filter media  Yes  Yes  One tap or whole house  Media fills up and must be replaced 
Activated alumina  Poor  Yes  One tap or whole house  Needs oxidation and the right pH 
Anion exchange  No  Yes  Whole house  Sulfate can get in the way 
Iron removal filters  Yes, after oxidation  Yes  Whole house  Works when your water has enough iron 
Distillation  Yes  Yes  Small batches  Slow and uses lots of energy 

The reverse osmosis numbers come from a Marquette University thesis that reviewed published research.

Reverse Osmosis

An under sink reverse osmosis (RO) system pushes water through a super fine membrane. It’s the most popular choice when you only need safe water for drinking and cooking. It removes arsenic V very well, but only part of arsenic III, so add oxidation if your test shows arsenic III.

Filter Media

Water flows through a tank filled with material that arsenic sticks to, a bit like a magnet picking up iron filings. Iron and titanium based media can catch both types of arsenic. When the media is full, you replace it.

Anion Exchange

This is our area of expertise, so here are the cautions sellers often skip. A strong base anion resin traps arsenic V and releases harmless chloride in its place. It doesn’t remove arsenic III.

Sulfate, a common mineral in well water, competes with arsenic for space on the resin. High sulfate water fills the resin faster. Our guide on removing sulfate from water explains why sulfate matters.

There’s also a hidden risk. If the resin runs past its limit, sulfate can push arsenic back into the water. For a short time, the treated water can carry more arsenic than the water going in. Engineers call this chromatographic peaking, so always recharge the resin on schedule.

When it’s designed well, anion exchange does work. In an EPA test at Fruitland, Idaho, a strong base anion system treated well water averaging 42 micrograms per liter of arsenic, mostly arsenic V.

Iron Removal Filters

If your well also has iron, filtering out the iron can carry arsenic out with it. Our article on removing manganese from well water covers similar oxidation filters.

Distillation

A distiller boils water and collects the steam, leaving arsenic behind. It works, but it’s slow and uses a lot of electricity.

How to Read an Arsenic Filter Label

Look for an NSF/ANSI certification and check which arsenic it covers:

  • NSF/ANSI 58 (reverse osmosis): covers only arsenic V. It applies if your water has free chlorine or contains only arsenic V.
  • NSF/ANSI 53 (filters and media): either an arsenic V claim or a broader claim that covers both types.
  • NSF/ANSI 62 (distillers): covers arsenic reduction for distillers.

Some city water uses chloramine instead of chlorine. The NSF/ANSI 58 fact sheet warns that chloramine may not change all arsenic III into arsenic V. Our page on chloramine removal explains the difference.

What Doesn’t Remove Arsenic

Knowing how to remove arsenic from water also means knowing what won’t work:

  1. Boiling. It doesn’t remove arsenic. As water boils off, the arsenic actually gets more concentrated.
  2. Chlorine or bleach alone. It kills germs and changes arsenic III to V, but doesn’t take arsenic out.
  3. Water softeners. They remove hardness minerals like calcium, not arsenic.
  4. Basic carbon pitchers that aren’t certified for arsenic.

Test Again After Installing

Test your treated water a few weeks after installation. Then follow the schedule from your system’s maker or your state. Keep testing your untreated well water too, because well water can change over time.

If arsenic starts rising in treated water, the filter media may be full, or a recharge may have been missed.

Conclusion

Now you know how to remove arsenic from water the smart way: test first, find your arsenic type, and then pick a treatment that matches. Order a lab test that includes arsenic speciation, sulfate, iron and pH. That one report will point you to the right system.

This guide is general information, not medical advice. If you’re worried about arsenic exposure, talk to your doctor or state health department.

FAQs

Can I remove arsenic from water at home?

Yes. A certified under sink reverse osmosis unit or filter media system works well for drinking water. Add an oxidation step if you have arsenic III.

Is it safe to shower in water with arsenic?

Most health advice focuses on water you drink and cook with. Ask your state health department what your level means for bathing.

How much does arsenic treatment cost?

It depends on the method, your water and whether you treat one tap or the whole house. Get quotes based on a full lab report.

Can Haitron help with arsenic treatment?

Yes. Haitron makes strong base anion resins used in arsenic removal systems. If you’re planning a whole house or community system, share your water analysis with our team, and we’ll help you choose the right resin for how to remove arsenic from water safely.

Tell us your water treatment requirement