How to Remove Cyanide From Water: A Simple Guide for Homes and Industry
Here’s how to remove cyanide from water: public water systems use ion exchange, reverse osmosis or alkaline chlorination to stay under the EPA limit of 0.2 mg/L. Factories usually treat wastewater by changing cyanide into a much less toxic chemical called cyanate, using chlorine, hydrogen peroxide, or sulfur dioxide and air. And one rule matters most: never add acid to water that contains cyanide, because it releases a toxic gas.
This guide covers both cases. First, what to do if cyanide shows up in drinking water. Then, how industrial plants choose a cyanide wastewater treatment method.
Is Your Drinking Water Affected?
Cyanide in tap water is rare. ATSDR (the US Agency for Toxic Substances and Disease Registry) says most cyanide in surface water turns into a gas and floats away. When it does reach drinking water, Ohio State University notes it usually comes from steel, metal plating, plastic or fertilizer factories nearby.
Here’s what you need to know:
- The EPA limit for public water is 0.2 mg/L (200 parts per billion) of free cyanide.
- The EPA lists ion exchange, reverse osmosis and alkaline chlorination as the best available treatments for public systems.
- If your test shows cyanide above the limit, stop drinking and cooking with the water. Call your water company or health department right away.
- Don’t try to boil it off. ATSDR warns that if water has hydrogen cyanide in it, even showering or washing clothes can release it into the air.
- If you have a private well, cyanide usually points to a factory source nearby. Report it to your state environmental agency too.
The Three Kinds of Cyanide
Cyanide in water isn’t just one thing. Think of it like keys: some are loose in your pocket, some are on a key ring, and some are welded to a lock. Each one needs a different approach.
| Type | What it is | How toxic? | Easy to destroy? |
| Free cyanide | Cyanide floating on its own | Most toxic | Yes |
| WAD cyanide (weak acid dissociable) | Cyanide loosely held by metals like copper, zinc or nickel | Very toxic | Yes, with most methods |
| Iron cyanide | Cyanide tightly locked to iron | Low, while it stays locked | No, it needs a different step |
Many permits limit total cyanide, which includes the iron type. Metal Finishing magazine notes that iron cyanide isn’t destroyed well by common treatments. That’s often why plants fail their tests.
How to Remove Cyanide From Water in Industry: Methods Compared
Here’s a quick look at the main cyanide destruction methods.
| Method | Free | WAD | Iron | Best for | Watch out for |
| Alkaline chlorination (two stages) | Yes | Yes | No | Metal plating shops | Needs strict pH control |
| Hydrogen peroxide | Yes | Yes | Settles out as solids | Clear liquids | High chemical cost |
| Sulfur dioxide and air (INCO) | Yes | Yes | Settles out as solids | Mining | Needs a copper helper |
| Iron salt precipitation | Partly | Partly | Yes | Final cleanup of iron cyanide | Creates sludge |
| Ion exchange | Yes | Yes | Captured, but hard to release | Low levels, final polish | Resin loses capacity |
| Biological treatment | Yes | Yes | Varies | Steady, adapted systems | Slow to start |
Alkaline Chlorination
This is the most common method in metal plating shops. It works in two stages.
In stage one, the pH is raised to 10 or higher, then chlorine bleach is added. This turns cyanide into cyanate. Hach, a water testing company, warns that at lower pH, toxic gases like cyanogen chloride or hydrogen cyanide can escape.
In stage two, the pH is lowered to about 8.5 to 9 and more bleach is added. This breaks cyanate down into carbon dioxide and nitrogen. One process patent warns that pH should never drop below 7 here, in case stage one wasn’t finished.
The catch? This method doesn’t destroy iron cyanide. So it may not meet a total cyanide limit by itself.
Hydrogen Peroxide
Hydrogen peroxide changes free and WAD cyanide into cyanate, usually with a bit of copper to speed things up. It works best on clear liquids rather than thick slurries. Iron cyanide settles out as a solid. The main downside is cost, according to 911Metallurgist.
Sulfur Dioxide and Air (INCO Process)
This method uses sulfur dioxide and air, with copper as a helper, to turn cyanide into cyanate. It’s popular in mining. 911Metallurgist notes it no longer needs a license to use.
Iron Salt Precipitation
Adding iron salts turns iron cyanide into a very solid material, such as Prussian blue (the same blue used in old paints). It’s usually a final cleanup step after the main treatment, not a full solution alone.
Ion Exchange and Activated Carbon
As a resin maker, here’s our honest view. A strong base anion resin can trap cyanide and metal cyanide bundles. Ion exchange is also an EPA approved method for drinking water.
But for factory wastewater, there are limits. One patent reports that some resins can drop cyanide from 0.5 to 3 ppm down to under 0.02 ppm, but they get weaker as they fill up. Another patent notes that cyanide bundles are hard to wash off the resin, so it slowly loses capacity over time.
So resin works best as a final polish for low levels, not as the main treatment for strong waste. For drinking water, Ohio State University also lists activated carbon combined with air stripping as an option.
Biological Treatment
Special bacteria can break down cyanide when they’re used to it. A 2019 review in Finishing and Coating says this method has worked well. It just needs a steady flow and time to get started.
New Methods Being Tested
Researchers at the University of Copenhagen tested a method using carbon dioxide that turns cyanide into a solid you can filter out. They removed up to 97% of cyanide in practical tests (ChemistryViews, 2021). It’s promising, but not yet common in factories.
Safety Rules You Can’t Skip
Cyanide is extremely toxic. Keep these rules in mind:
- Never add acid to water containing cyanide. It creates deadly hydrogen cyanide gas.
- Keep stage one of chlorination at pH 10 or higher.
- Keep cyanide waste separate from acid waste.
- Test for free, WAD and total cyanide, since each tells you something different.
- Follow your site’s safety plan and work with a qualified engineer.
After Cyanide: Cleaning Up the Metals
When you destroy cyanide, the metals it was holding get released. These include copper, zinc, nickel and cadmium. They still need to be removed, usually by making them settle out as solids.
A special resin can then catch what’s left. Our chelating resin is designed for catching heavy metals in this kind of final polishing step.
Conclusion
Knowing how to remove cyanide from water starts with knowing what kind of cyanide you have and where it came from. For drinking water, call your water company or health department first. For industrial wastewater, get a lab test for free, WAD and total cyanide, then match your water to the methods above with help from a qualified engineer.
FAQs
Can a home water filter remove cyanide?
Reverse osmosis is one of the EPA’s best methods, but ask the maker for independent cyanide test results first. If your water is over the limit, contact your health department before anything else.
Does boiling remove cyanide?
No, don’t rely on it. Boiling can release hydrogen cyanide gas into the air you breathe.
Why does treated water still fail a total cyanide test?
Iron cyanide survives most treatments. Adding an iron salt step usually helps bring total cyanide down.
Can Haitron help with cyanide removal?
Yes. Haitron makes strong base anion resins for final cyanide polishing and chelating resins for removing the metals left behind. Share your lab results with our team, and we’ll tell you honestly where resin fits in your plan for how to remove cyanide from water.